Schlüter-DESIGNBASE-SL is a high-quality profile to quickly create skirting covers.

Schlüter-DESIGNBASE-SL-A, made of high-quality colour coated or anodised aluminium, is available in heights of 60 and 80 mm.

The profile is attached to wall areas with a suitable installation adhesive (e.g. Schlüter-KERDI-FIX). Optionally, it can be fitted with a sealing lip that is available as an accessory to protect the edge joint from moisture and to reduce the transmission of impact sound.

The DESIGNBASE-SL assortment also includes matching internal and external metallic corner pieces and end caps to easily create visually appealing connections.

1. Remove any substances that may inhibit bonding, such as grease etc. prior to applying the installation adhesive.
2. Adhere Schlüter-DESIGNBASE-SL with the installation adhesive Schlüter-KERDI-FIX or an equivalent material. Apply a sufficient number of adhesive spots on the reverse of the profile and set the profile in place.
   Note: Optionally, the profile can be equipped with a sealing lip that is available as an accessory to protect the edge joint from moisture and to reduce the transmission of impact sound. The sealing lip is pressed firmly into the profile from the front for the aluminium variant, or clipped on from the back for the stainless steel variant, so that its front edge is flush with the profile.
3. Remove any excess adhesive with a suitable cleaning product.

Schlüter-DESIGNBASE-SL is available in the following materials:

• AE = anodised aluminium
• AEEB = brushed stainless steel effect anodised aluminium
• AC = colour coated aluminium
• EB = brushed stainless steel (V2A) material no. 1.4301 = AISI 304

Material properties and areas of application

In applications exposed to chemical or mechanical stresses, the profile’s suitability must be verified.

The information provided below is intended as a general guideline.

DESIGNBASE-SL-AE (anodised aluminium): The aluminium features an anodised finish that retains a uniform appearance during normal use. Damaged anodised surfaces can be restored with paint. Surface areas must be protected against abrasion or scratching. Aluminium is sensitive to alkaline media. Cementitious materials, in conjunction with moisture, become alkaline, which may result in corrosion depending on the concentration and length of exposure (aluminium hydroxide formation).

For this reason, remove adhesive or grouting material immediately from all visible areas and do not cover freshly installed coverings with foil.