Floor covering calculator for BEKOTEC
Find the right floor covering for your building project quickly and easily!
Compare floor constructions
- 1. Construction project
- 2. Heating
- 3. Products
-
Is your project a new construction or a renovation?
-
Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN F
- No joints required in the screed
- No field size limitation in the screed
- Only the covering requires a movement joint
- Low supply temperature
- Quick response time
Now also available in a Peel & Stick version: Schlüter-BEKOTEC-EN-F-PS.
Or with heat and sound insulation: Schlüter-BEKOTEC-EN-FI.
Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN
- No joints required in the screed
- No field size limitation in the screed
- Only the covering requires a movement joint
- Low supply temperature
- Quick response time
Conventional heated screed according to DIN 18560-2 with standard screed coverage, e.g. gypsum-based or cement screed
- Risk of cracking and buckling
- Joints in the screed must be continued in the covering
- Maximum screed field size 40 m²
Non buckling, thin layer covering assembly with Schlüter-BEKOTEC-EN F
- Total assembly height: 31 mm (incl. screed coverage)
- For heating pipes with a diameter of 14 mm
- Low supply temperature
- Quick response time
- Thin layer
- Non buckling
- No joints required in the screed
- No field size limitation in the screed
- Only the covering requires a movement joint
Now also available in a Peel & Stick version: Schlüter-BEKOTEC-EN-F-PS.
Or with heat and sound insulation: Schlüter-BEKOTEC-EN-FI.
Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN
- Total assembly height: 52 mm (incl. screed coverage)
- Low supply temperature
- For heating pipes with a diameter of 16 mm
- Quick response time
- Thin layer
- Non buckling
- No joints required in the screed
- No field size limitation in the screed
- Only the covering requires a movement joint
Conventional screed
- Risk of cracking and buckling
- Joints in the screed must be continued in the covering
- Maximum screed field size 64 m²
Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN FK
- For renovation on load bearing substrate
- Direct load transfer by gluing to the substrate
- No joints required in the screed
- No field size limitation in the screed
- Only the covering requires a movement joint
- Low supply temperature
- Quick response time
Now also available in a Peel & Stick version: Schlüter-BEKOTEC-EN-FK-PS
Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN FTS
- For renovation on load bearing subsrate
- Integrated impact sound improvement of 25 dB
- No joints required in the screed
- No field size limitation in the screed
- Only the covering requires a movement joint
- Low supply temperature
- Quick response time
Conventional heated screed according to DIN 18560-2 with standard screed coverage, e.g. gypsum-based or cement screed
- Risk of cracking and buckling
- Joints in the screed must be continued in the covering
- Maximum screed field size 40 m²
Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN FK
- For renovation on load bearing substrate
- Direct load transfer by gluing to the substrate
- No joints required in the screed
- No field size limitation in the screed
- Only the covering requires a movement joint
Now in a self-adhesive version: Schlüter-BEKOTEC-EN-FK-PS
Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN FTS
- For renovation on load bearing substrate
- Integrated impact sound improvement of 25 dB
- No joints required in the screed
- No field size limitation in the screed
- Only the covering requires a movement joint
Conventional screed
- Risk of cracking and buckling
- Joints in the screed must be continued in the covering
- Maximum screed field size 64 m²
