Changing the non-slip tread
When changing the non-slip tread, ensure the surrounding temperature is at least 10 °C.
- Remove all residue of the previous self-adhesive tape.
- Prior to attaching the new tape, clean the surface of the profile with a solvent.
- Peel back approx. 5 cm of the protective liner and position the self-adhesive tape on the surface of the profile. Avoid touching the adhesive with your fingers.
- Peel the protective liner back further and gradually install the full length of the tape.
- Use a rubber roller to firmly press the self-adhesive tape into place. Always begin from the centre and roll toward the edges.
