Schlüter-JOLLY-MC  Finishing profile made of chrome-plated brass

Schlüter-JOLLY-MC is a high-quality chrome-plated brass finishing profile with a 90 degree angle for external corners and edges of tiled coverings. The right angled profile geometry forms a neat finish for tile coverings. The joint spacers on both sides create a uniform grout joint with the tile. The geometric undercutting offers additional bonding surface for the grout.

In addition to their decorative effect, the profiles of our JOLLY-MC series are an especially good choice for edge protection for tiled wall coverings. JOLLY-MC can also be used to create skirtings and neat transitions for coverings such as carpet, natural stone or epoxy resin coverings for wall areas.

Matching external corner pieces are available for JOLLY-MC profiles to create simple and elegant connections. Neat and decorative corner designs are possible with the prefabricated corner pieces together with the newly developed plug-in connection system. The corners are supplied with innovative plastic connectors that serve as installation aids.


Product image JOLLY-MC 1©Schlüter-Systems KG
Product image JOLLY-MC 2©Schlüter-Systems KG
Product image JOLLY-MC 3©Schlüter-Systems KG
Product image JOLLY-MC 4©Schlüter-Systems KG
Cross-section drawing JOLLY-MC 1©Schlüter-Systems KG
zoom_out_map search
Product image JOLLY-MC 1
Product image JOLLY-MC 2
Product image JOLLY-MC 3
Product image JOLLY-MC 4
Cross-section drawing JOLLY-MC 1

General product information

How to install this product

  1. Select the profile height of JOLLY-MC according to the tile thickness and the installation method.
  2. Apply tile adhesive to the area where the tile covering will end, using a notched trowel. If the JOLLY-MC profile is to be installed in wall corners, complete the tiling of one wall, then apply tile adhesive in the corner area of the second wall.
  3. Firmly press the trapezoid-perforated anchoring leg of the JOLLY-MC profile into the adhesive and align it.
  4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
  5. Fully embed the adjoining tiles and adjust them in such a way that the upper lip of the profile is flush with the tile.
    Note: The profile may slightly protrude or be recessed in the wall area to offset dimensional variations in the covering material.
  6. Set the tile to the lateral joint spacer to ensure a uniform joint of 1.5 mm.
  7. Completely fill the space between the tile and the JOLLY-MC profile with grout.
  8. Use suitable materials and tools for the sensitive surfaces to avoid scratches or other damage. Residue of grout and tile adhesive should be removed immediately.
  9. External wall corners with JOLLY-MC profiles can also be created with mitre cuts or with the optionally available external corner pieces. If using an external corner piece, the supplied plastic pins serve as an alignment aid between the profile and the corner piece. The application of grout then gives the assembly the necessary strength.

What this product is made from

Schlüter-JOLLY is available in the following material versions:

  • MC = chrome-plated brass

Material properties and areas of application

In special cases, the suitability of a proposed type of profile must be verified, based on anticipated chemical, mechanical and/or other stresses.

Schlüter-JOLLY-MC (chrome-plated brass) is a finishing profile that is especially well suited for wall corners and transitions. It is ideal for matching chrome fixtures. Surface areas must be protected against abrasion or scratching. Remove all adhesive and grouting material immediately.

How to look after this product

Schlüter-JOLLY requires no special maintenance or care. Do not use abrasive cleaning agents on sensitive areas. Damaged anodised surfaces can be restored with paint.

Note: Due to different manufacturing processes, slight colour discrepancies between the profiles and the corners may occur.

Downloads