Schlüter-LIPROTEC-PB  End caps

  • Schlüter-LIPROTEC-PB/EV are end caps made of anodised aluminium or brushed anodised stainless steel

  • Available as a set
  • Staircases
Product image LIPROTEC-PB 1©Schlüter-Systems KG
Product image LIPROTEC-PB 2©Schlüter-Systems KG
zoom_out_map search
Product image LIPROTEC-PB 1
Product image LIPROTEC-PB 2

General product information

What this product is made from

Schlüter-LIPROTEC-PB/EK is available in the following materials:

Profile:

  • AE = anodised aluminium
  • AEEB = brushed stainless steel effect anodised aluminium

Material properties and areas of application

In applications exposed to chemical or mechanical stresses, the profile’s suitability must be verified.

The information provided below is intended as a general guideline.

Schlüter-LIPROTEC-PB-AE /-AEEB (anodised aluminium): The aluminium features an anodised finish that retains a uniform appearance during normal use.

Damaged anodised surfaces can be restored with paint.

Surface areas must be protected against abrasion or scratching. Aluminium is sensitive to alkaline media. Cementitious materials, in conjunction with moisture, become alkaline, which may result in corrosion depending on the concentration and length of exposure (aluminium hydroxide formation). For this reason, remove adhesive or grouting material immediately from all visible areas and do not cover freshly installed coverings with foil.

How to look after this product

Schlüter-LIPROTEC-PB/EK requires no special maintenance or care. Do not use abrasive cleaning agents on the sensitive surfaces.

Damaged anodised surfaces can be restored with paint.

All cleaning agents must be free of hydrochloric and hydrofluoric acid.

Due to minor heat development of the Schlüter LED strips used in the profile, the expansion of the profile and the utilised diffuser lens may differ.

Downloads