Floor covering calculator for BEKOTEC

Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN F

• No joints required in the screed
• No field size limitation in the screed
• Only the covering requires a movement joint
• Low supply temperature
• Quick response time

Now also available in a Peel & Stick version: Schlüter-BEKOTEC-EN-F-PS.
Or with heat and sound insulation: Schlüter-BEKOTEC-EN-FI.

Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN

• No joints required in the screed
• No field size limitation in the screed
• Only the covering requires a movement joint
• Low supply temperature
• Quick response time

Conventional heated screed according to DIN 18560-2 with standard screed coverage, e.g. gypsum-based or cement screed

• Risk of cracking and buckling
• Joints in the screed must be continued in the covering
• Maximum screed field size 40 m²

Non buckling, thin layer covering assembly with Schlüter-BEKOTEC-EN F

• Total assembly height: 31 mm (incl. screed coverage)
• For heating pipes with a diameter of 14 mm
• Low supply temperature
• Quick response time
• Thin layer
• Non buckling
• No joints required in the screed
• No field size limitation in the screed
• Only the covering requires a movement joint

Now also available in a Peel & Stick version: Schlüter-BEKOTEC-EN-F-PS.
Or with heat and sound insulation: Schlüter-BEKOTEC-EN-FI.

Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN

• Total assembly height: 52 mm (incl. screed coverage)
• Low supply temperature
• For heating pipes with a diameter of 16 mm
• Quick response time
• Thin layer
• Non buckling
• No joints required in the screed
• No field size limitation in the screed
• Only the covering requires a movement joint

Conventional screed

• Risk of cracking and buckling
• Joints in the screed must be continued in the covering
• Maximum screed field size 64 m²

Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN FK

• For renovation on load bearing substrate
• Direct load transfer by gluing to the substrate
• No joints required in the screed
• No field size limitation in the screed
• Only the covering requires a movement joint
• Low supply temperature
• Quick response time

Now also available in a Peel & Stick version: Schlüter-BEKOTEC-EN-FK-PS

Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN FTS

• For renovation on load bearing subsrate
• Integrated impact sound improvement of 25 dB
• No joints required in the screed
• No field size limitation in the screed
• Only the covering requires a movement joint
• Low supply temperature
• Quick response time

Conventional heated screed according to DIN 18560-2 with standard screed coverage, e.g. gypsum-based or cement screed

• Risk of cracking and buckling
• Joints in the screed must be continued in the covering
• Maximum screed field size 40 m²

Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN FK

• For renovation on load bearing substrate
• Direct load transfer by gluing to the substrate
• No joints required in the screed
• No field size limitation in the screed
• Only the covering requires a movement joint

Now in a self-adhesive version: Schlüter®-BEKOTEC-EN-FK-PS

Non buckling, thin layer heated covering assembly with Schlüter-BEKOTEC-EN FTS

• For renovation on load bearing substrate
• Integrated impact sound improvement of 25 dB
• No joints required in the screed
• No field size limitation in the screed
• Only the covering requires a movement joint

Conventional screed

• Risk of cracking and buckling
• Joints in the screed must be continued in the covering
• Maximum screed field size 64 m²