Schlüter-TREP-GK/-GLK  Replacement slip-resistant tapes

  • Schlüter-TREP-G-B/KB is a self-adhesive tape (wide, slip resistance class R11) as a replacement for the stair nosing profiles TREP-G-B and -GK-B
  • Schlüter-TREP-GL-B/KB is a self-adhesive tape (wide, slip resistance class R10) as a replacement for the stair nosing profiles TREP-GL-B and -GK-B
  • Schlüter-TREP-G-S/KB is a self-adhesive tape (narrow, slip resistance class R11) as a replacement for the stair nosing profiles TREP-G-S and -GK-S
  • Schlüter-TREP-GL-S/KB is a self-adhesive tape (narrow, slip resistance class R10) as a replacement for the stair nosing profiles TREP-GL-S and -GK-S

Schlueter©Schlüter-Systems KG
zoom_out_map search

General product information

How to install this product

Changing the slip-resistant tread

When changing the slip-resistant tread, ensure the surrounding temperature is at least 10 °C.

  1. Remove all residue of the previous self-adhesive tape.
  2. Prior to attaching the new tape, clean the surface of the profile with a solvent.
  3. Peel back approx. 5 cm of the protective liner and position the self-adhesive tape on the surface of the profile. Avoid touching the adhesive with your fingers.
  4. Peel the protective liner back further and gradually install the full length of the tape.
  5. Use a rubber roller to firmly press the self-adhesive tape into place. Always begin from the centre and roll toward the edges.

Downloads