Search

Schlüter-TREP-TAP  Front edge cover profile

Schlüter-TREP-TAP is a special cover profile made of anodised aluminium, which can be installed in conjunction with our stair nosing profiles TREP-S and -B (aluminium) to easily create neatly covered front edges at stairs. The profile is either inserted laterally through the designated groove or snapped into place from below.


Product image TREP-TAP 1©Schlüter-Systems KG
Cross-section drawing TREP-TAP 1©Schlüter-Systems KG
Cross-section drawing TREP-TAP 2©Schlüter-Systems KG
zoom_out_map search
Product image TREP-TAP 1
Cross-section drawing TREP-TAP 1
Cross-section drawing TREP-TAP 2

General product information

How to install this product

  1. The front edge cover profile TREP-TAP can only be used in conjunction with TREP-S and -B, which have aluminium support profiles.
  2. The profile is either inserted laterally through the designated groove or snapped into place from below.
  3. Attach the back of Schlüter-TREP-TAP to the riser (e.g. with Schlüter-KERDI-FIX).

Downloads

DownloadSelection
Schlüter-TREP-SE / -S / -B | Product data sheet 3.2
Product data sheet - © Schlueter-Systems
PDF – 0.23 MB